GMiner 3.44 Download (AMD+NVIDIA

2024-07-10 23:11| 来源: 网络整理| 查看: 265

Tips

GMiner achieves very fast performance by fully exploiting the computational power of GPUs and is suitable for large-scale mining rigs. Below is information on how to achieve maximum performance.

Gminer Cracks 100% LHR Unlock As Well - Windows Guide A quick look at Gminer full LHR unlock. Well Gminer is out swinging now as well looks like most of the miners have cracked the LHR code on most GPUs. Heres how to set this up in windows. Watch the video: LHR Unlock Updates w/ GMiner & lolMiner (RTX 3080 Ti Tested) Both miners spike above 300 for watts, but from the video, Gminer looks to run at a lower base wattage (230) with spikes to 330w, where as lolminer ran at a base wattage of 260 and spikes to 316w.

TIP! 1-2mh less and +/- 20w per hour per gpu is around 2,5$ of power less per gpu per month, good thing for cost because those few mh are few cents per month compared with cost you save :)

GMiner & lolMiner LHR ETH Unlock? (Low Power?) Tested with RTX 3060 Gminer is stable 50 to 53 mh/s on 3070ti zotac holo amp. But the gpu mem temp is 110 and throttling... So i limited Everything for 48mh/s so that the memtemp is 96 to 100.

TIP! Add your PSU efficiency in HiveOS to get a closer reading on software.

These types of cards when you open them up they are going to want more core voltage. I believe it's a combination of both that's causing that bobbing. If the frequency is bouncing it's pulling power to compensate and it's porpoising up and down. That's really bad. I'd be in fear of bricking the damn card. I'd start core voltage at +5 and increase little by little to a max of +15. I'd use others setting for previous non-LHR cards as a benchmark also. What you normally do for settings are irrelevant. These cards are power-hogs and not worth running RVN or ETH on. ~170w Is the best I can tweak them to. I have a pair of rx6700rt AMDs running 80mH with boosts on 2miners upto 120mH+! At a total ~220 w at combined both at ~ 63C. Moreover, I'm not a fan of either miner software. I have found Trex rules on these LHR cards. Word is Nicehash has opened these LHR cards up. These cards are great for SHIB and FLUX. I'll be working on tests with NANO, SOL & GAS this weekend as a couple pay points hit I'll switch over and test them. Great review. I personally don't really want to fiddle with them for ETH. I can't seem to figure out why I keep seeing ETH estimates so high.

How to prepare for mining after the Ethereum Merge (what to mine after ETH 2.0)

We Discuss the Upcoming Ethereum Merge that will push Ethereum from a Proof of Work Minable Coin for GPU Mining Hobbyist to Proof of Stake. Are you Prepared for Mining After the Ethereum Merge? The bigger questions, What to Mine After Ethereum 2.0!?

Without Ethereum Mining Going Away, let's make sure as a Home CryptoCurrency Miner your ready?! What you need to know about staking Ethereum.

【本文地址】

公司简介

联系我们